Panel technical information

Ecococon panels are double-shell products. Straw panelling technology is unique, unmatched in the world. Only up to 15% humidity straws are used in the production of straw panels. The compression degree of 100-120 kg/m3 is maintained while pressing the straw panels, preserving multidirectional straw structure, resulting in better thermal resistance of the straw panel. The surplus of straw is cut off very accurately using special mechanisms. This is done so smoothly that you will use about twice less plaster for this type of panels compared with other panelling or thatched surfaces. Ecococon panels are plastered with special natural Ecococon clay plasters.

A particular advantage of these panels is their speed of installation on the construction site. According to the level of preparation, approximately 100 m2 of wall area can be installed by ​​four people within 1-2 days. Due to their special design the panels can be connected without the use of special machines or tools, only a winch. Panels are not too heavy (the weight is from 20 to 200 kg) and can be moved by hand or with small hoists, without powerful cranes and heavy duty equipment. Installation the Ecococon panels allows to avoid cold bridges, because when connecting the panels their straw edges are pushed flush together. This way it is possible to achieve a particular tightness of the structure. Ecococon panels can be used for building one or more story homes. Ecococon panels make the load-bearing structure of the building. These panels meet all requirements for resistance, compression, fire and durability. Standard panels of 2,8×0,8×0.4 m are always in stock. Custom panels (lintels, window sills, pillars, corner panels, triangular panels) are produced individually upon receipt of your structure/house project. Panels are fabricated and supplied after developing the panel project of the structure/house.


Saulės gojus skydai copy-1

Download the PDF file .